Accidental clicks fade into the background

Earlier this year we stepped back to examine the value users, advertisers, and publishers derive from clicks on content ads. As you integrate ads with your site's content and navigation, we want to ensure a positive user experience. We identified a few areas for improvement and began implementing changes, starting with our new ad formats in April.

Continuing these improvements, we've just changed our text ads slightly to help reduce accidental clicks. In the past, users could click on both the background and full text of an ad, but now they can click only on the title and URL of a text ad. By allowing users to click only on the ad title and URL, we aim to decrease accidental clicks, better aligning visitor behavior with their intent. Overall, the decrease in accidental clicks will keep users on your website, interacting your content, until they intend to click on an ad.


In addition, this new clickable format better aligns with the text ad formats shown on Google.com. We hope this format change contributes to a better, more consistent user experience.

Finally, this change won't just improve user experience on your site; it benefits advertisers as well. We currently monitor clicks on Google ads for accidental clicks, and the format change complements our monitoring system by further ensuring advertisers only pay for meaningful clicks. By reducing accidental clicks, we hope to increase advertiser campaign value and satisfaction, encouraging additional spend and facilitating higher monetization for all publishers.

Posted by Katie Mandel - AdSense Product Marketing

Say hello to placement targeting

We wanted to let you know about two recent changes to our site targeting feature. As you may know, site targeting allows advertisers to select specific publisher sites on which to run their ads. Advertisers can target your site if they've determined a match between their offerings and the interests of visitors to your site.

The first change is that we've renamed 'site targeting' to 'placement targeting' to better reflect the variety of targeting options we offer. Advertisers can still target their ads to an entire site, but they can now also target your individual ad units or groups of pages based on how you've set up ad placements using custom channels. Over the next few weeks, we'll be updating references to 'site targeting' in your account and in our Help Center.

The second change is that advertisers can bid on placement-targeted ads (formerly known as site-targeted ads) on a cost-per-click (CPC) basis. Previously, advertisers could only bid on these targeted ads on a cost-per-impression (CPM) basis. Just as with contextually targeted CPC ads, you'll generate earnings for valid clicks on placement-targeted CPC ads.

While you can also add the URLs of specific CPC placement-targeted ads to your filter list, please keep in mind that all placement-targeted ads will participate in the ad auction with contextually targeted ads. Allowing more ads into the auction will help increase competition and ultimately your revenue.

Finally, we'd like to leave you with a few reminders to help you maximize your revenue potential with placement targeting:

• Turn your custom channels into ad placements. These ad placements will allow you to highlight specific sections of your site that may appeal to advertisers.
  
• Enable text and image ads for your ad units. By opting in to different ad types on your site, you'll increase the competition in the ad auction, which can lead to additional revenue for your account over time.
  
• Use the 300x250 Medium Rectangle. This ad format is one of our best-performing ad units, and many advertisers use it when creating rich media (image and video) campaigns. Again, you'll benefit from the increased competition for your ad space.

Posted by Arlene Lee and Katie Mandel - AdSense Publisher Support/Product Marketing

Answers to your video units questions

Since launching video units to U.S. publishers with English-language websites, we've received quite a few emails about this new product. Here are the top 4 questions we'd like to address:

1. I selected "Automated Content" but the videos aren't relevant to my site. What can I do?

Thanks to your feedback, we've implemented a feature to improve content relevance. Before, if you typed in [cars planes taxis], for example, only videos which matched all of these keywords would be returned. If there were no videos which matched all of these keywords, we delivered a default set of videos from the most popular YouTube partner content. We've modified this so that now [cars planes taxis] will deliver videos which have to do with cars or planes or taxis. This will greatly reduce the likelihood of default popular content being delivered to your units. In general, to refine video targeting with the "Automated Content" setting, you should try different keyword combinations to see what works best.

2. Can I select the individual videos that appear in my video unit?

It isn't currently possible to select individual videos for your video units. If you're choosing "Automated Content" for your video unit, you can further refine video targeting by testing different combinations of keywords.

3. I followed your instructions to link my AdSense and YouTube accounts, but my account still shows as "pending". I haven't gotten a confirmation email yet.

You might have to manually link your AdSense Account to your YouTube account. To do so please follow the steps below.

1. Log in to your AdSense account.
   
2. Click the "Account Access" link located under the "My Account" tab.
   
3. Under "sites", find "www.youtube.com" and click the "grant access" link.
   

Your AdSense account should now successfully be linked to your YouTube account.



4. Do you offer any other sizes for the video units?

Right now, we only offer the three sizes listed in your account when you generate the ad code -- note that the 'mini' size is larger than what appears on your code generation page. We'll be sure to announce any new sizes and styles as they become available.

Please keep in mind that video units are different from click-to-play video ads; while video units contain YouTube partner videos complemented by standard AdSense ads, click-to-play video ads are ads created by AdWords advertisers in video format. At this time, no in-stream video ads will show in your video units.

To make changes to your video units or try them out for the first time, visit your AdSense Setup page. Thanks again for your feedback, and stay tuned for more updates on video units.

Posted by Ryan Hayward - AdSense Product Marketing

Right from the resource

We know it can be tough to keep track of all the official AdSense-related documentation we've put online; that's why we're happy to introduce you to the new Resources tab in your account.

We've compiled links to a number of resources under this tab, including the Help Center, Program Policies, and Help Forum. If you're looking to improve the performance of your ads, you can now easily navigate to our Optimization Tips page or to publisher tools like Analytics.

Need help with implementing your ad code or viewing your ads? Try our Demos & Guides or Troubleshooting Wizards, all available under the Resources tab.

Oh, and if you happen to forget the URL of the Inside AdSense blog, you can always find a link to us under this new tab as well. :)

Posted by Arlene Lee - AdSense Publisher Support

Adsense Updated!!!

Two weeks ago, we gave you a sneak peek of what was in store for November. Now, we're happy to let you know that we've started rolling out our new ad management feature to publishers! As a reminder, this feature will save the settings of your ad units within your AdSense account. That means, each time you want to change the colors, channels, or even the corner styles for your ad units, you can make the changes directly in your account rather than generating and pasting new code. Again, we're still working on rolling this feature out to all publishers, so don't worry if you don't see it in your account yet -- it'll be there soon.

Below are a few answers to questions you might have about this new feature:

How has the process of generating new ad code changed?

On the 'Get Ads' page of the 'AdSense Setup' tab, you'll find the same code generation wizard you've used before. At the end of the wizard, you'll now be prompted to provide a name for the ad unit you've just created. We recommend using a descriptive name so that you'll remember where you pasted this ad unit. For instance, use names like "Homepage Leaderboard, example.com" or "Top 300x250, Sports pages." You can find more detailed instructions in our Help Center.

Why do I need to name my new ad units now?

With this new feature, all your new ad code will have a name and an unique ad slot ID. This will help you remember them so you can make changes to them later directly on the 'Manage Ads' page. As noted above, please be as specific as possible when naming your ad units and include information such as location, ad size, and domain.

Will the old ad code on my sites still work?

Any ad code you've generated in the past will continue to work as normal. However, please note that the old ad code will not automatically be updated to include this feature. If you'd like to apply this new feature to your old ad units, you can import the code and save the new settings.

Why don't I see anything after adding a new ad unit to my site?

If you're implementing a newly created ad unit on your site, the ad unit may not appear for up to 10 minutes while our servers are informed about the settings for the new unit. Don't feel like waiting? Simply use the Preview function on the 'Manage Ads' page to check out your updated pages immediately.

I made some changes to my ads, but nothing changed on my site. What happened?

Just as noted above, any changes to the ad unit may take up to 10 minutes to be visible. Feel free to use the Preview function to see your changes immediately.

How do I change the size of my ad units on the 'Manage Ads' page?

Unfortunately, size is one of the few things you can't change with this new feature. To change the size of your ads, you'll need to visit the 'Get Ads' page to generate a new ad unit.

How do I delete some of the ad units I created?

Right now, it isn't possible to delete ad units from within your account. This is designed to help avoid instances where an active ad units might be accidentally deleted. However, ad units that have not generated impressions for 7 days will become 'inactive' and will automatically be hidden. You can check the 'Show inactive AdSense units' box to unhide them.

One last reminder - please keep in mind that this feature only applies to ad code generated from your account at https://www.google.com/adsense. If you create your ad code through one of our partners, such as Blogger, Dada.net, or Apple iWeb, you'll continue to use the standard ad code.

Want to learn more about this feature? Feel free to check out our complete guide. You might also find our videos on generating ad code and managing your ads useful.

Finally, we'd like to hear what you think about this feature.

Posted by Cathleen Jia - AdSense Publisher Support